Description
TMM10 high-frequency microwave RF board
Number of floors: 2
Plate thickness:0.635mm
Plate used:TMM10
Minimum hole diameter: 0.2mm
Surface treatment:immersion silver
Minimum trace width/distance: 0.2mm/0.25mm
Process characteristics: high-frequency materials, TMM10
The TMM10 PCB is a kind of high-frequency antenna PCB board, which has the following characteristics and advantages:
- High-frequency performance: The TMM10 laminate has a very low dielectric constant thermal stability coefficient, and at the same time has a thermal expansion coefficient comparable to that of copper, and very uniform and consistent dielectric constant characteristics, which is suitable for high-reliability stripline and microstrip line applications.
- Mechanical performance: The TMM10 high-frequency laminate has excellent mechanical performance, extremely low creep and cold deformation, the dk thermal stability coefficient and thermal expansion coefficient match that of copper, and has highly reliable plated through holes.
- Processing advantages: The TMM10 laminate can provide a relatively large size, and can use the standard PCB subtractive process, resistant to process chemicals, and the material will not be damaged during manufacturing and assembly.
- Environmental certification: The TMM10 laminate is RoHS certified and environmentally friendly.
When using the TMM10 PCB, the following issues need to be noted:
- Design requirements: Reasonably select the dielectric constant, thickness and other parameters of the TMM10 PCB according to the specific high-frequency circuit design requirements.
- Processing technology: Adopt the standard PCB processing technology to ensure processing quality and reliability.
- Environmental adaptability: Consider the performance stability of the TMM10 PCB under different environmental conditions, such as temperature and humidity.
- Signal integrity: Pay attention to the PCB layout and wiring to ensure the integrity and transmission performance of the signal.
- Cost factor: The cost of the TMM10 PCB is relatively high, and the cost factor needs to be comprehensively considered in the design and application.
